daily reminder that milled ak47s like that pic are extremely rare and the vast vast majority of ak pattern rifles are the stamped sheet metal akm “modern automatic kalashnikov”
the original design of the ak47 was stamped, they couldnt get it to work so they switched to milled until they could get the akm to be reliable
the famous ‘ak47’ is actually quite rare, those are milled out of a block of metal. the one used by dunies across the world is typically the akm- same idea but separare sheets of metal stamped together and it’s much lighter
Most AK's are modern ones made up of metal sheets stamped into shape with presses. The original design was to be stamped like that, but the presses of the time were not precise and the guns produced would not work, so they drilled the guns out of solid blocks of metal.
>ummmm there is no way this dude at the end of his rope in a war where he would likely be tortured and executed for being a massive fricking twat would kill himself, it's all israeli propaganda!!!!!
There is no dishonor in suicide when faced with the impending tsunami of rape that only the Red Army can commit. Aside from eternal damnation obviously.
>i went back in time >helped germany to win WW2 >go back to present to see the horrors i have created. >everyone is at fricking peace, like, real fricking peace, not a single war at all >no trannies, no gays, both completely cured taking a pill a day for a week. >black and white, all people in general behaving like equals >everyone learning how to do actual stuff like fixing things, playing music instruments and writting/reciting poetry. >in that timeline Wakanda actually exists.
thats the moment i had enough of that shit, went back to the past, killed hitler and made it look like a suicide.
It's a piece of fricking friction pressed sheet metal slopjob shit. I've built 3 of them over the years and am unfortunately intimately familiar with the platform. The critically important trunnion sitting in folded 1mm thick sheet metal with thin rivets holding it in is the most 1950s tank factory nonsense horsetrash that has ever been popularized. The barrel gets pressed into the trunnion and held in by a pin, making the entire trunnion and barrel assembly pivoting and resting on fricking thin sheet metal. Not to mention the dual lug bolt design (which is also critically dependant on the trunnion for maintaining headspace) is prone to wear one side faster than the otherside unless the metalurgy is 1000% correct and flawless vodka infused steel, and when the bolt lug is worn 0.001 in. out of spec with the other side you risk a major explosion of the entire rifle as only one lug is making a locked connection when the bolt is closed. The rest of the barrel components are press fitted on, like the rear sight leaf, gas block, and front sight post. That's fine and all, until something breaks and needs replacing. Guess what happens then? Frick you, that's what, because the rifle was designed in a fricking tank factory shit hole that requires 100 different 500 ton presses with special jigs in order to move shit around on the barrel.
That whole thing about AKs being hard to break and easy to fix? It's a fricking meme, nothing more. Don't get me started on the fricking trigger. It's uses a fricking guitar string wound up by a vodka money wrapped around the hammer then snaking it's way back to sit on the trigger and actuate the mechanism. Not to mention the tiny dissconnector springs that like to snap in fricking half for no fricking reason making the gun 100% useless. It's a piece of fricking shit from top to bottom. The only slightly acceptable versions, like others have mentioned, are the milled models, but those are like less than 1% of all AKs, if even that much. Fricking hunks of shit. I hate building them, but I've bought into the jigs and presses so I still do it even though I've grown to hate them.
Lol stfu b***h my dad has an cheap shit rebuilt Czech upper stamped AK that he’s ran at least 20000 rounds through and it works just fine with basic maintenance
Which AK-47? You mean the Type 1 AK with badly welded sheet metal that never left prototyping stage? Or the type 2 AK that is milled but has never seen service outside of a handfull of units and mainly resides in museums nowadays, and barely ever left the hands of the soviets? Or the AKM, which isn't even an AK-47 in name, that is still only a tiny fraction of the Kalashnikov pattern rifles ever produced? Or would it be alright to use something like a Romanian md. 63, which is produced under license but Kalashnikov had no hand in creating? Where do you draw the line?
2 years ago
Anonymous
For starters, not an AK-74.
2 years ago
Anonymous
Nobody cares nerd. AKMs are AK47s. AK74s are AK47s. RPKs are AK47s. Saiga12s are AK47s. Every American rifle with a box magazine (which are actually clips) and pistol grip is an m16. Every desert eagle is chambered in .50 BMG. Yes BMG not AE. Every police pistol is a glock. Every military pistol is a 1911, unless it's a Luger.
Nobody gives a shit.
2 years ago
Anonymous
Boxes are square though and magazines don't be square, so the M16 can't be a rifle by your definition
More like a normal person who is scarred and calloused from needing to use a 50 ton press with custom made steel jigs, custom rivet equipment, special order metric carb bits, and a broken window from having a press punch slip while under 30 tons of pressure while pressing in a barrel pin and having it shoot by me with the power of a .45 auto bullet and break the window to my workshop.
Just sit at your fricking table and assemble an AR with a handfull of springs and small metal detents easily slipped into place and held with other detents. It's so much fricking easier and you can do it on your kitchen table. Even installing a barrel nut and mating a barrel to a reciever is easy as shit and never any trouble. The only part that even comes close to resembling the shittyness of an AK is putting on some gas blocks, and they are never trouble because we aren't moronic soviets who can't make things that actually fit, so the gas blocks usually slide in place by hand and that's that. Frick building AKs.
people who are into guns for the engineering, craft, mechanisms, and history of firearms aren't mass shooters. It's the morons who don't actually care about guns and only use them as a means for violence with no appreciation or respect for the gun itself who are possible shooters.
If anything, the people who build rifles are more engineering and machining enthusiasts than violence lovers. You have to have a deep love of metal working to be assembling your own AKs, or you'll never end up getting it finished.
you are fricking moronic, I want those school shooters to take their angst on the federal reserve and politicians. you fricking c**ts are too scared to say it.
What the frick are you talking about? I'm talking about the ins and outs of press fitting poorly machined surplus soviet parts together, not whatever alex jones looney tunes shit you are talking about.
School shooters are the worst pieces of trash on the planet because they ruin this hobby for the rest of us. Frick all of them.
2 years ago
Anonymous
I military pressed my wife's pussy 20 min ago and I had to sustain it for 20 minutes before I came. You don't know shit.
2 years ago
Anonymous
>You don't know shit.
I know that I did the same thing to your mom last night
2 years ago
Anonymous
it's called the mating press you fricking jarhead
2 years ago
Anonymous
oh yeah? well my balls slapped her butthole and she moaned and cummed with me.
2 years ago
Anonymous
you should be asleep by now private frickstick
2 years ago
Anonymous
this is why we run 20 miles.
2 years ago
Anonymous
young dumb and full of cum oorah
2 years ago
Anonymous
Yes.
2 years ago
Anonymous
you marine homosexuals are worthless, name one accomplishment in the last 100 years
2 years ago
Anonymous
>stormed the beaches at Gudal Canal and Iwo Jima >stormed Korea and killed more asiatics the the Army >gave you another place hold in Vietnam that the airfoce and army couldnt hold >Iraq desert storm >Iraq 2.0
army and chairforce are fricking worthless
2 years ago
Anonymous
>stormed the beaches at Gudal Canal and Iwo Jima
The organization that did that was comprised of white Americans. The horde of tattooed mexican gangster rejects that uses the name Marines nowadays is a different entity entirely.
2 years ago
Anonymous
>moving goal posts
2 years ago
Anonymous
bro I know what it feels like to have a tight wet pussy slide up and down my shaft, I had to give it up for eight years. go frick yourself
2 years ago
Anonymous
Mexican hands typed this post. Go to be Jose, you won't get the Purple Heart that my grandpa got on Saipan no matter how much you want it. He hated mexicans more than any other human being I've ever met.
2 years ago
Anonymous
cope harder
2 years ago
Anonymous
Alright Pablo Hernandez
2 years ago
Anonymous
there was like one Black person and one Hispanic in my company.
2 years ago
Anonymous
Rip grandpa
2 years ago
Anonymous
btw I just fricked her in the ass for being a bad girl while she talked on the phone with her new boyfriend.
2 years ago
Anonymous
>shit talking the marines
pls don't, they have every reason to talk shit.
I’m assuming like the Mac 10 it’s cheap mass produced and easy to get ahold of and if you pour it at someone and mag dump while sprinting to get a head start on the cops there’s a solid chance the person you point it at will die.
They also built a space shuttle that could guide and land itself, which no one else would figure out for like another 30 years. Unfortunately they ran out of money and left it to rot in a hangar.
arm a platoon of heavily trained infantry with Kalishnikov-47's vs a platoon of american's with basic training with the top of the line military optics. I know who I am gambling on.
Romanian AKMs were like 300$ only like ~12 years ago. You could get a jank ass SAR or Romak during the early 2000s for about 200$. Now Century Arms thinks they can sell fricked ass bent WASRs for $1200 bucks becuase they are "exotic". b***h, people only bought them here because they were half the price of the cheapest AR. Now they are through the roof because all the demilled kits are gone and Palmetto is dunking on the AR market and the entire thing has flipped on its head. Now an AK is 1200 and an cheap AR is 500. What the frick, man. I miss the days of cheap soviet garbage being sold for dirt cheap. Now it's all fetishized to shit and back and costs a fortune so the cheap option is soulless elmer fudd grade AR-15s.
Weapons dealers in Somalia often get their hands on Chinese AK's because Iran ships cases of them to the conflict in Yemen, where they're easily diverted.
These are newly manufactured rifles, as recent as 2020, and make up the majority of the guns sold in the Somali black market. Despite this, they still go for the same price as the few rusty Soviet AK's that are floating around Somalia.
So an unused Chinese AK manufactured as recent as the late 2010s will go for the same price as a Soviet one, whose manufacturing date is at latest the 1980s. This is reportedly due to a perception in Somalia that Soviet or Russian manufacturing is the gold standard of the industry, even if it's a false perception
frick I want to get ahold of a modern Chinese AK so bad and see what they are like now. My friend used to have a MAK and it was the smoothest shit ever. Polytechs are so rare that good examples of them are north of 4,000 dollars now.
I will never fricking forgive NORINCO for trying to sell tanks and rocket launchers under the table to gangsters in LA and then getting caught and getting chinese guns banned. Those frickers ruined everything.
We could have 249$ brand new well put together AKs in the US right fricking now but they had to go and ruin everything, and now Canada gets all the good stuff to themselves.
Miss me with that chinkoid shit. Give me the east german with the ribbed dimples so I can use to it pleasure my gaping dump hole when it's not being used in combat. Smooth chicom crap gives me no pleasure, it gives me no sustenance.
It's a meme as far as an actual service gun goes. Soldiers usually aren't GT-tier oper8ors who take great time to explore the history behind the gun they're using, they're usually below average IQ c**ts just there for the money.
>running around in heavy gear >pussy trigger goes off
yeah they made a safety for you fricking morons, and you would just shoot yourselves with a light trigger when you look down the barrel
there is a lock in place to keep that from happening, they even gave you an easy thumb switch, if you have a nice day with an M-4 you are doing the world a favor
daily reminder that milled ak47s like that pic are extremely rare and the vast vast majority of ak pattern rifles are the stamped sheet metal akm “modern automatic kalashnikov”
the original design of the ak47 was stamped, they couldnt get it to work so they switched to milled until they could get the akm to be reliable
in english doc
the famous ‘ak47’ is actually quite rare, those are milled out of a block of metal. the one used by dunies across the world is typically the akm- same idea but separare sheets of metal stamped together and it’s much lighter
Most AK's are modern ones made up of metal sheets stamped into shape with presses. The original design was to be stamped like that, but the presses of the time were not precise and the guns produced would not work, so they drilled the guns out of solid blocks of metal.
stamped what? a stamped upper? a stamped barrel? this is the shitposting board not the manufacturing board, Black person
a stamped receiver you moron. an ak doesnr have an upper
Most people just pretend to have a room temperature IQ, but you're a rare one. Your post is an actual 78iq moron trying to sound smart.
FRICK YOU PIECE OF GARBAGE SHIT
If his dick really did cut off there, why isn’t he bleeding like crazy?
Thanks! Next time we need a wikipedia article read to us we know just who to call!
the amount of chink versions in this country is insane
>milled AKs
I hate that meme.
>we need a gun for the counter terrorist
>bomb has been planted
>we need a gun for the good guys
hitler if he was in 3000s
Its never been proven he suicided. Read a book
>ummmm there is no way this dude at the end of his rope in a war where he would likely be tortured and executed for being a massive fricking twat would kill himself, it's all israeli propaganda!!!!!
He ran, he hid and never came back. It doesn't matter if he killed himself or not, he will always be remember as a pussy.
There is no dishonor in suicide when faced with the impending tsunami of rape that only the Red Army can commit. Aside from eternal damnation obviously.
>i went back in time
>helped germany to win WW2
>go back to present to see the horrors i have created.
>everyone is at fricking peace, like, real fricking peace, not a single war at all
>no trannies, no gays, both completely cured taking a pill a day for a week.
>black and white, all people in general behaving like equals
>everyone learning how to do actual stuff like fixing things, playing music instruments and writting/reciting poetry.
>in that timeline Wakanda actually exists.
thats the moment i had enough of that shit, went back to the past, killed hitler and made it look like a suicide.
>we need a gun for chads
>not a SAM5
lol
>American AK
Literally superior non-poverty tier firearms.
It's a piece of fricking friction pressed sheet metal slopjob shit. I've built 3 of them over the years and am unfortunately intimately familiar with the platform. The critically important trunnion sitting in folded 1mm thick sheet metal with thin rivets holding it in is the most 1950s tank factory nonsense horsetrash that has ever been popularized. The barrel gets pressed into the trunnion and held in by a pin, making the entire trunnion and barrel assembly pivoting and resting on fricking thin sheet metal. Not to mention the dual lug bolt design (which is also critically dependant on the trunnion for maintaining headspace) is prone to wear one side faster than the otherside unless the metalurgy is 1000% correct and flawless vodka infused steel, and when the bolt lug is worn 0.001 in. out of spec with the other side you risk a major explosion of the entire rifle as only one lug is making a locked connection when the bolt is closed. The rest of the barrel components are press fitted on, like the rear sight leaf, gas block, and front sight post. That's fine and all, until something breaks and needs replacing. Guess what happens then? Frick you, that's what, because the rifle was designed in a fricking tank factory shit hole that requires 100 different 500 ton presses with special jigs in order to move shit around on the barrel.
1/2
2/2
That whole thing about AKs being hard to break and easy to fix? It's a fricking meme, nothing more. Don't get me started on the fricking trigger. It's uses a fricking guitar string wound up by a vodka money wrapped around the hammer then snaking it's way back to sit on the trigger and actuate the mechanism. Not to mention the tiny dissconnector springs that like to snap in fricking half for no fricking reason making the gun 100% useless. It's a piece of fricking shit from top to bottom. The only slightly acceptable versions, like others have mentioned, are the milled models, but those are like less than 1% of all AKs, if even that much. Fricking hunks of shit. I hate building them, but I've bought into the jigs and presses so I still do it even though I've grown to hate them.
Lol stfu b***h my dad has an cheap shit rebuilt Czech upper stamped AK that he’s ran at least 20000 rounds through and it works just fine with basic maintenance
>Czech AK
That's called a vz.58 and isn't a fricking AK you dunce. It's functions completely differently and shares no parts between the two.
The VZ 58 is one of the best AK variants there is.
>The VZ 58 is one of the best AK variants
That's not an AK variant, it's an entirely different gun.
>VZ 58
>AK variant
I think my Honda is a Porsche variant.
>tries to shoot Charlie with le heckin based M16rino
>jams
>gets pumped full of holes by an AK
lmao
>no AK47 or M16 in either video
Which AK-47? You mean the Type 1 AK with badly welded sheet metal that never left prototyping stage? Or the type 2 AK that is milled but has never seen service outside of a handfull of units and mainly resides in museums nowadays, and barely ever left the hands of the soviets? Or the AKM, which isn't even an AK-47 in name, that is still only a tiny fraction of the Kalashnikov pattern rifles ever produced? Or would it be alright to use something like a Romanian md. 63, which is produced under license but Kalashnikov had no hand in creating? Where do you draw the line?
For starters, not an AK-74.
Nobody cares nerd. AKMs are AK47s. AK74s are AK47s. RPKs are AK47s. Saiga12s are AK47s. Every American rifle with a box magazine (which are actually clips) and pistol grip is an m16. Every desert eagle is chambered in .50 BMG. Yes BMG not AE. Every police pistol is a glock. Every military pistol is a 1911, unless it's a Luger.
Nobody gives a shit.
Boxes are square though and magazines don't be square, so the M16 can't be a rifle by your definition
Chubby reddit digits typed this.
More like a normal person who is scarred and calloused from needing to use a 50 ton press with custom made steel jigs, custom rivet equipment, special order metric carb bits, and a broken window from having a press punch slip while under 30 tons of pressure while pressing in a barrel pin and having it shoot by me with the power of a .45 auto bullet and break the window to my workshop.
Just sit at your fricking table and assemble an AR with a handfull of springs and small metal detents easily slipped into place and held with other detents. It's so much fricking easier and you can do it on your kitchen table. Even installing a barrel nut and mating a barrel to a reciever is easy as shit and never any trouble. The only part that even comes close to resembling the shittyness of an AK is putting on some gas blocks, and they are never trouble because we aren't moronic soviets who can't make things that actually fit, so the gas blocks usually slide in place by hand and that's that. Frick building AKs.
Hey, FBI? This guy, right here
You sound like a future mass shooter
people who are into guns for the engineering, craft, mechanisms, and history of firearms aren't mass shooters. It's the morons who don't actually care about guns and only use them as a means for violence with no appreciation or respect for the gun itself who are possible shooters.
If anything, the people who build rifles are more engineering and machining enthusiasts than violence lovers. You have to have a deep love of metal working to be assembling your own AKs, or you'll never end up getting it finished.
you are fricking moronic, I want those school shooters to take their angst on the federal reserve and politicians. you fricking c**ts are too scared to say it.
fricking NPCs, pussyfooting around blaming political parties for your inaction
What the frick are you talking about? I'm talking about the ins and outs of press fitting poorly machined surplus soviet parts together, not whatever alex jones looney tunes shit you are talking about.
School shooters are the worst pieces of trash on the planet because they ruin this hobby for the rest of us. Frick all of them.
I military pressed my wife's pussy 20 min ago and I had to sustain it for 20 minutes before I came. You don't know shit.
>You don't know shit.
I know that I did the same thing to your mom last night
it's called the mating press you fricking jarhead
oh yeah? well my balls slapped her butthole and she moaned and cummed with me.
you should be asleep by now private frickstick
this is why we run 20 miles.
young dumb and full of cum oorah
Yes.
you marine homosexuals are worthless, name one accomplishment in the last 100 years
>stormed the beaches at Gudal Canal and Iwo Jima
>stormed Korea and killed more asiatics the the Army
>gave you another place hold in Vietnam that the airfoce and army couldnt hold
>Iraq desert storm
>Iraq 2.0
army and chairforce are fricking worthless
>stormed the beaches at Gudal Canal and Iwo Jima
The organization that did that was comprised of white Americans. The horde of tattooed mexican gangster rejects that uses the name Marines nowadays is a different entity entirely.
>moving goal posts
bro I know what it feels like to have a tight wet pussy slide up and down my shaft, I had to give it up for eight years. go frick yourself
Mexican hands typed this post. Go to be Jose, you won't get the Purple Heart that my grandpa got on Saipan no matter how much you want it. He hated mexicans more than any other human being I've ever met.
cope harder
Alright Pablo Hernandez
there was like one Black person and one Hispanic in my company.
Rip grandpa
btw I just fricked her in the ass for being a bad girl while she talked on the phone with her new boyfriend.
>shit talking the marines
pls don't, they have every reason to talk shit.
>we need a gun for euro terrorists
absolute kino gun
>we need a gun for the cop
>bringing a revolver to a mag fight
ngmi
>We need a gun for the black dudes
Why DO nigs like these again?
I’m assuming like the Mac 10 it’s cheap mass produced and easy to get ahold of and if you pour it at someone and mag dump while sprinting to get a head start on the cops there’s a solid chance the person you point it at will die.
It's a semiauto pistol originally marketed to police, they aren't automatic but are really easy to modify
Cheap, small, common cartridge, pretty high capacity mags
It has a cool name and you can rhyme it with alot of things in urban music
They wear very baggy clothes so it's concealable for them.
>sir we need bodyguards for a high level politician/CEO
The AK is the great liberator. The AR is the oppressor.
proven and effective, cheap to manufacture. The soviets got one thing right.
They also built a space shuttle that could guide and land itself, which no one else would figure out for like another 30 years. Unfortunately they ran out of money and left it to rot in a hangar.
Is there anything wrong with the AK? Last time I checked it's the most cost efficient gun out there at the same time being reliable and effective.
arm a platoon of heavily trained infantry with Kalishnikov-47's vs a platoon of american's with basic training with the top of the line military optics. I know who I am gambling on.
>when SEALs use AK's
wouldn't be the first time
>we need a gun for the good guys
>uses the sightmark special and forward assist
>still comes out on top
I kneel...
member when you could pick up an AK-47 or an SKS for like $50?
I have a mosin nagant with all of these soviet stamps on it that was manufactured in 1933, I wonder how many people died carrying it.
I think I paid $100 for a SAR-1 which was just an Romanian AK with the sear removed from the trigger
lucky frick SAR-1 are collecter items now
>AK's are inaccurate
well I might gotten lucky then, mine shoots straight and nails every target to 500 yds
Romanian AKMs were like 300$ only like ~12 years ago. You could get a jank ass SAR or Romak during the early 2000s for about 200$. Now Century Arms thinks they can sell fricked ass bent WASRs for $1200 bucks becuase they are "exotic". b***h, people only bought them here because they were half the price of the cheapest AR. Now they are through the roof because all the demilled kits are gone and Palmetto is dunking on the AR market and the entire thing has flipped on its head. Now an AK is 1200 and an cheap AR is 500. What the frick, man. I miss the days of cheap soviet garbage being sold for dirt cheap. Now it's all fetishized to shit and back and costs a fortune so the cheap option is soulless elmer fudd grade AR-15s.
supply and demand, russians ran out of supply and Obummer sanctioned them
Weapons dealers in Somalia often get their hands on Chinese AK's because Iran ships cases of them to the conflict in Yemen, where they're easily diverted.
These are newly manufactured rifles, as recent as 2020, and make up the majority of the guns sold in the Somali black market. Despite this, they still go for the same price as the few rusty Soviet AK's that are floating around Somalia.
So an unused Chinese AK manufactured as recent as the late 2010s will go for the same price as a Soviet one, whose manufacturing date is at latest the 1980s. This is reportedly due to a perception in Somalia that Soviet or Russian manufacturing is the gold standard of the industry, even if it's a false perception
>East German Brown Bakky AKs still floating around out in the wild
Neat
frick I want to get ahold of a modern Chinese AK so bad and see what they are like now. My friend used to have a MAK and it was the smoothest shit ever. Polytechs are so rare that good examples of them are north of 4,000 dollars now.
I will never fricking forgive NORINCO for trying to sell tanks and rocket launchers under the table to gangsters in LA and then getting caught and getting chinese guns banned. Those frickers ruined everything.
We could have 249$ brand new well put together AKs in the US right fricking now but they had to go and ruin everything, and now Canada gets all the good stuff to themselves.
bro, the best AK's came out of romania.
Yeah, if you win the lottery and get the 1 in 100 where the front sights aren't sitting 15 degrees off to the left or right
apparently I did.
If only you knew the nightmare that you escaped
top CUGIR quality right here. The peasants at State Factory #11 put their utmost care into the making of this rifle
hows that trigger slap?
I only use the pad of my forefinger so I dunno.
dis homie squeezes the trigger
wouldn't say squeeze, it's a 3 lbs trigger.
>I'm a competition shooter with a heavy trigger
frick off
>3 lbs heavy
>5 lbs tigger chad's keep knocking down targets at 800 and 1000 yds
I use a 12 lbs trigger, 3 lbs is a hair trigger.
go away /k/id you don't even know what you are talking about
Modern Chinese aks are shit. Which you would know if you weren't a fricking noguns butthole.
hey look, a Somalian
Miss me with that chinkoid shit. Give me the east german with the ribbed dimples so I can use to it pleasure my gaping dump hole when it's not being used in combat. Smooth chicom crap gives me no pleasure, it gives me no sustenance.
>gun owner is a sexual deviant
wow, shocker. almost like their wires are crossed completely wrong
>tfw didn't buy an m1 garand for $200
i love guns
I mean, that's the Fedbois first choice, too.
It's the most commonly used gun in the world except for with developed militaries so, what are you complaining about?
was it a meme?
Yes. Muh hyper burst is stupid.
Yes, but it's still a pretty cool concept
It's a meme as far as an actual service gun goes. Soldiers usually aren't GT-tier oper8ors who take great time to explore the history behind the gun they're using, they're usually below average IQ c**ts just there for the money.
SQUEEEEEEZE THE FRICKING TRIGGER!
>we need a car for the terrorist
leave the transportation to me
>we need a gun for the Polish sidekick
>running around in heavy gear
>pussy trigger goes off
yeah they made a safety for you fricking morons, and you would just shoot yourselves with a light trigger when you look down the barrel
lmao moron-proof triggers
there is a lock in place to keep that from happening, they even gave you an easy thumb switch, if you have a nice day with an M-4 you are doing the world a favor
>we need a gun for the benevolent dictator
I miss him bros...
Imagine their disappointment that he didn't piss or shit on them.
I wish all americans put their guns to their temples and pulled the trigger
Like a israeli temple ?
https://en.wikipedia.org/wiki/Temple_(anatomy)
Stop using all that medical lingo and speak English
>We need a gun for the future
How are you supposed to aim with that?
The sights are right there on top of the gun.
Source!?
>we need a gun to rush B
>one. two , three, four. I'm the the marine corps
kek
what makes you 'kek' about that? we are gungho.
frick off recruit that hasn't made sergeant, it's funny because I lived it
Opinions on ZPAP M70s?
We need a gun for the African mercenaries
L1A1 for me, great battle rifle.